/en/html/weishengjibeng/121.html External circulation evaporator_Evaporation equipment_Wenzhou chinz machinery co.,ltd - 名人彩票,名人彩票注册
中文 ENGLISH
Your position : Home  > Products > Evaporation equipment

External circulation evaporator

External circulation evaporator


System composition:

Each effect heater、each effect separator、condenser(mixing type or surface type)、feeding pump、discharge pump、vacuum pump、condensate pump、platform、electrical instrument control cabinet, level automatic control system and valve&pipe fittings, etc.


Work principle:

In the external natural circulation evaporator ,solution circulate depends on the material liquid density difference : liquid is heated in the heating chamber tube, temperature increase, density decreases, and cooling solution in a circular pipe to produce density difference cause liquid in heating tube upward, downward circulating loop tube. After heated the solution in the form of sensible heat into the evaporation chamber flash, cool. And then down into the circular tube, cyclic heating evaporation.


Product features:

Natural circulation evaporation solution inside the equipment circulation rate is not big, generally less than 1 m/SEC. In order to prevent fouling and crystallization, heating tube should be completely submerged. This evaporator is suitable for the scale is not serious and less subject to solution concentration. The advantages of simple structure, easy manufacture, low power consumption. Defect is slower loop does not apply to the solution viscosity is larger, a large number of crystal materials, cannot be in-place cleaning, material heating time is too long, not suitable for heat-sensitive materials.


Range of application:

Suitable for the scale is not serious and less subject to solution concentration.  
Evaporation capacity: 100-10000kg/h (Series)
According to the characteristics of the material and the size of the evaporation, can design into a single effect or multi-effect evaporation unit.  
In consideration of each factories all kinds of solutions with different characteristics and complexity, our company will provide specific technical scheme according to client’s requirements, reference for users to choose!


Project

Single-effect

Double-effect

Triple-effect

Four-effect

Five-effect

Water evaporation    capacity (kg/h)

100-2000

500-4000

1000-5000

8000-40000

10000-60000

Steam pressure

0.5-0.8Mpa

Steam    consumption/evaporation capacity (With thermal compression pump)

0.65

0.38

0.28

0.23

0.19

Steam pressure

0.1-0.4Mpa

Steam    consumption/evaporation capacity

1.1

0.57

0.39

0.29

0.23

Evaporation    temperature (℃)

45-95℃

Cooling water    consumption/evaporation capacity

28

11

8

7

6

Remark: In addition    to the specifications in the table, can be separately designed according to    customer's specific material.

© 2017 Wenzhou chinz machinery co.,ltd All Rights Reserved